NNN-BC Red Flexors
- John_XCD
- Posts: 73
- Joined: Thu Nov 05, 2020 8:46 am
- Location: SLC, UT
- Ski style: Powdery aspen glades
- Favorite Skis: XC race skis, Finnmark, Breidablikk, S-98, Objective BC, FT62 (xplore model)
- Favorite boots: Guard Adv NNNBC
NNN-BC Red Flexors
This topic has come up a few times in the past. I purchased a few of these "hard" red flexors out of curiosity. They seem potentially fun on the descents (encourage the ball of foot to remain engaged on the trailing ski) but less than ideal on the climbs (especially if breaking trail in deeper snow).
Do folks ski with these all day or switch out the flexor while skiing (a la XPLORE)? I can imagine occasionally wanting to do a long climb with no flexor (NNNBC "free pivot mode") and then pop in the red for the descent. Does the binding get packed full of snow? If so any ideas to solve this-- perhaps modify black flexors so they are even lower resistance for climbing? The flexors are easy enough to switch out in the garage but perhaps not so in the field? Or maybe climbing with the red isn't too bad on consolidated snow?
Then again, skiing up and down without stopping to fiddle with equipment is one of the joys of XCD...
Do folks ski with these all day or switch out the flexor while skiing (a la XPLORE)? I can imagine occasionally wanting to do a long climb with no flexor (NNNBC "free pivot mode") and then pop in the red for the descent. Does the binding get packed full of snow? If so any ideas to solve this-- perhaps modify black flexors so they are even lower resistance for climbing? The flexors are easy enough to switch out in the garage but perhaps not so in the field? Or maybe climbing with the red isn't too bad on consolidated snow?
Then again, skiing up and down without stopping to fiddle with equipment is one of the joys of XCD...
- Woodserson
- Posts: 2987
- Joined: Wed Feb 11, 2015 10:25 am
- Location: New Hampshire
- Ski style: Bumps, trees, steeps and long woodsy XC tours
- Occupation: Confused Turn Farmer
Re: NNN-BC Red Flexors
Yeah red flexors!
When I had my Ingstad's set up for NNN-BC I used the reds and they worked really nice for the turns and they were snappy on the climbs. I don't think I'd do expedition style polar sledging with them, but as the kick is limited climbing a hill it didn't matter much. That being said, this was consolidated snow use only, I did not use them in fresh deep snow for climbing (but downhill yes, much fun), so no experience there. But otherwise, snappy kick up, nice control down.
The free-pivot climb idea is an interesting one, the reds can be a bit stiff so if you suffer from cold slow hands you may want to leave them in. Choose your suffering.
When I had my Ingstad's set up for NNN-BC I used the reds and they worked really nice for the turns and they were snappy on the climbs. I don't think I'd do expedition style polar sledging with them, but as the kick is limited climbing a hill it didn't matter much. That being said, this was consolidated snow use only, I did not use them in fresh deep snow for climbing (but downhill yes, much fun), so no experience there. But otherwise, snappy kick up, nice control down.
The free-pivot climb idea is an interesting one, the reds can be a bit stiff so if you suffer from cold slow hands you may want to leave them in. Choose your suffering.
Re: NNN-BC Red Flexors
Interesting. They're for Nordic tour skating, aren't they? At least that's why I got a pair to put in the NNN BC bindings on mine. That was spring, so I haven't skated them yet. Found them here.
https://www.akers-ski.com/product/32NF.html
https://www.akers-ski.com/product/32NF.html
- athabascae
- Posts: 234
- Joined: Wed Dec 30, 2015 9:17 pm
- Location: Whitehorse, Yukon
- Favorite Skis: Asnes MR48; Asnes Ingstad
- Favorite boots: Alpina Traverse BC; Alpina Alaska BC
Re: NNN-BC Red Flexors
エイダン.シダル wrote: ↑Tue Oct 19, 2021 6:19 pmInteresting. They're for Nordic tour skating, aren't they? At least that's why I got a pair to put in the NNN BC bindings on mine. That was spring, so I haven't skated them yet. Found them here.
https://www.akers-ski.com/product/32NF.html
Yes, I have stiff red flexors in magnums on my lundhag nordic skates (which I hope to use in the next 10 days or so when the marshes are frozen enough -- wahoo!)
Sorry to the OP. I've yet to put them on my ski bindings.
- John_XCD
- Posts: 73
- Joined: Thu Nov 05, 2020 8:46 am
- Location: SLC, UT
- Ski style: Powdery aspen glades
- Favorite Skis: XC race skis, Finnmark, Breidablikk, S-98, Objective BC, FT62 (xplore model)
- Favorite boots: Guard Adv NNNBC
Re: NNN-BC Red Flexors
Following up my own question --
Skinned up yesterday with black flexors, switched to red at the top which I used for a few laps of a pitch at the top (climbing back up a mellow cat track) and the ski back down.
The exchange - Super easy at temps near freezing. The red rubber seems like it get might get too stiff in very cold temps. Would think of keeping these in a pocket closer to the body.
The climb - No big issue with the red flexors on a packed gentle grade (just using scales). Would not want them in if I'm climbing steeps with full skins or breaking trail while climbing.
The descent - Noticeable improvement. Skied some of the more challenging descents I have attempted on NNNBC (~30 degrees, sort of skied out crud of heavy powder but still soft). The technique, limitations etc of NNNBC obviously remain but the increased resistance helps keeps BOF on the ski in uneven terrain.
Overall a really cheap "power up" for the unusual people that like to telemark on NNNBC. No reason not to try these!
I was hesitant to try climbing without a flexor (seems like binding will pack with snow and then probably can't put one in) but I might just trim down a pair of black flexors to allow more of a free pivot for climbing.
Skinned up yesterday with black flexors, switched to red at the top which I used for a few laps of a pitch at the top (climbing back up a mellow cat track) and the ski back down.
The exchange - Super easy at temps near freezing. The red rubber seems like it get might get too stiff in very cold temps. Would think of keeping these in a pocket closer to the body.
The climb - No big issue with the red flexors on a packed gentle grade (just using scales). Would not want them in if I'm climbing steeps with full skins or breaking trail while climbing.
The descent - Noticeable improvement. Skied some of the more challenging descents I have attempted on NNNBC (~30 degrees, sort of skied out crud of heavy powder but still soft). The technique, limitations etc of NNNBC obviously remain but the increased resistance helps keeps BOF on the ski in uneven terrain.
Overall a really cheap "power up" for the unusual people that like to telemark on NNNBC. No reason not to try these!
I was hesitant to try climbing without a flexor (seems like binding will pack with snow and then probably can't put one in) but I might just trim down a pair of black flexors to allow more of a free pivot for climbing.
- lilcliffy
- Posts: 4147
- Joined: Thu Jan 01, 2015 6:20 pm
- Location: Stanley, New Brunswick, Canada
- Ski style: backcountry Nordic ski touring
- Favorite Skis: Asnes Ingstad, Combat Nato, Amundsen, Rabb 68; Altai Kom
- Favorite boots: Alpina Alaska BC; Lundhags Expedition; Alfa Skaget XP; Scarpa T4
- Occupation: Forestry Professional
Instructor at Maritime College of Forest Technology
Husband, father, farmer and logger
Re: NNN-BC Red Flexors
Cross-country AND down-hill skiing in the backcountry.
Unashamed to be a "cross-country type" and love skiing down-hill.
Unashamed to be a "cross-country type" and love skiing down-hill.
- tkarhu
- Posts: 319
- Joined: Thu Jan 13, 2022 11:58 am
- Location: Finland
- Ski style: XCD | Nordic ice skating | XC | BC-XC
- Favorite Skis: Gamme | Falketind Xplore | Atomic RC-10
- Favorite boots: Alfa Guard | boots that fit
Re: NNN-BC Red Flexors
Bringing back an old thread… rather than the Physics Debate thread that is related, too It can be of interest for those who ski XCD on stiff NNN-BC boots.
With a black flexor, the boot mostly pivots around the NNN-BC bar, when you lift a heel. By contrast, with a red flexor, the bootsole bends, too, because flexor and sole give in more similarly.
A red flexor helps to keep your ball of foot against ground. The red flexor slows down your heel rise, when it would go too far too fast. With a black flexor, when you notice that rear leg weight is on your toetips already, it takes some time and attention to bring weight back down to the ball of foot. So the red flexor probably helps with quick tele turns.
I think there might be another benefit, too… My Guard boots create blisters at heels, and I think that is because they have so stiff soles. I can feel pressure at the heel blister spot, when the heel is highest. Maybe less heel rise mean less pressure… and less blisters, too.
The images show how much difference there is in heel rise. The difference is not night and day. I pull the shoes lightly from their strings in the photos.
I am planning to ski both up and down with the red flexors, when skiing XCD. If I go on a long flat tour, there might be need for the black flexors (and Compeeds!). At slow speeds, like with a pulk, I believe the flexors do not make a difference, when you are mostly walking.
A standard flexor does not keep up with a stiff boot (Alfa Guard, Alaska BC, Crispi Svartisen), when its sole does not give in easily at ball of foot. I tested this today.Johnny wrote: ↑Mon Feb 03, 2020 11:55 amLocking the rails with BOF is the secret of NNN-BC, which not a lot of people seem to understand...
]…]
this is also the reason why you need a pretty good technique to ride NNN-BC downhill
[…]
if NNN-BC was not designed as a downhill bindings, there wouldn't be any rails on them...
http://telemarktalk.com/viewtopic.php?f ... 483#p30405
With a black flexor, the boot mostly pivots around the NNN-BC bar, when you lift a heel. By contrast, with a red flexor, the bootsole bends, too, because flexor and sole give in more similarly.
A red flexor helps to keep your ball of foot against ground. The red flexor slows down your heel rise, when it would go too far too fast. With a black flexor, when you notice that rear leg weight is on your toetips already, it takes some time and attention to bring weight back down to the ball of foot. So the red flexor probably helps with quick tele turns.
I think there might be another benefit, too… My Guard boots create blisters at heels, and I think that is because they have so stiff soles. I can feel pressure at the heel blister spot, when the heel is highest. Maybe less heel rise mean less pressure… and less blisters, too.
The images show how much difference there is in heel rise. The difference is not night and day. I pull the shoes lightly from their strings in the photos.
I am planning to ski both up and down with the red flexors, when skiing XCD. If I go on a long flat tour, there might be need for the black flexors (and Compeeds!). At slow speeds, like with a pulk, I believe the flexors do not make a difference, when you are mostly walking.
Last edited by tkarhu on Thu Jan 26, 2023 4:17 pm, edited 4 times in total.
- JohnSKepler
- Posts: 559
- Joined: Thu Sep 08, 2022 6:31 pm
- Location: Utahoming
- Ski style: XCBCD
- Favorite Skis: Voile Objective BC, Rossignol BC 80
- Favorite boots: Scarpa F1 Bellows, Alpina Alaska XP
- Occupation: Rocket Scientist
Re: NNN-BC Red Flexors
They seem analogous to the stiff black flexors for the Xplore binding. I haven't used them a lot but am going to start. For Tele skiing they do a great job of keeping your forefoot planted providing significantly better control. At least that's my experience!
Veni, Vidi, Viski
- Johnny
- Site Admin
- Posts: 2256
- Joined: Wed Dec 18, 2013 5:11 pm
- Location: Quebec / Vermont
- Ski style: Dancing with God with leathers / Racing against the machine with plastics
- Favorite Skis: Redsters, Radicals, XCD Comps, Objectives and S98s
- Favorite boots: Alpina Alaska XP, Alfa Guards, Scarpa TX Comp
- Occupation: Full-time ski bum
Re: NNN-BC Red Flexors
You are right. Good skiing technique, (and good technique only) keeps your BOF against the ski. Nothing else.
Flexors, cables, springs and all that stuff are superfluous.
/...\ Peace, Love, Telemark and Tofu /...\
"And if you like to risk your neck, we'll boom down Sutton in old Quebec..."
"And if you like to risk your neck, we'll boom down Sutton in old Quebec..."
- Stephen
- Posts: 1485
- Joined: Thu Aug 06, 2020 12:49 am
- Location: PNW USA
- Ski style: Aspirational
- Favorite Skis: Armada Tracer 118 (195), Gamme (210), Ingstad (205), Objective BC (178)
- Favorite boots: Alfa Guard Advance, Scarpa TX Pro
- Occupation: Beyond
6’3” / 191cm — 172# / 78kg, size 47 / 30 mondo
Re: NNN-BC Red Flexors
I don’t want to ride @Johnny’s coattails, but that is what I was thinking before I got to his comment.
I think the hard flexor, or a cable help put pressure on the front of the ski (god forbid, not the tip!), but don’t help keep the BOF planted on the ski.
I do think an active binding, like Meidjo, working against a stiff boot, like TX Pro, does have enough resistance to heel lift that it makes the boot break, and helps keep BOF on or closer to the ski.
But rubber flexors are so much weaker than skier forces, that they are inconsequential for BOF on ski.
Another post asked if stiffer flexors would keep one from falling forward.
Just test that at home. Try leaning against a hard flexor and see how little support that actually provides in a leaning forward situation.
But skiers on NTN, or the like can lean way over the front of the skis without falling forward.