Objective BC skin tail affixion method?

[mikesee]

Whaddya got?

The tips on the OB/BC's have that perfect little slot, but the tails are rounded and smooth and no matter what I do my tail hook/loop wants to slip off.

What's your solution?

[jalp]

Whaddya got?

The tips on the OB/BC's have that perfect little slot, but the tails are rounded and smooth and no matter what I do my tail hook/loop wants to slip off.

What's your solution?

I have the same issue with my V6s. I switched to a Pomoca twin tip tail hook. It's an improvement over the regular hook but can still pop off on occasion.

[spopepro]

I run straight cut race skins with no tail clip. Works fine.

[mikesee]

Whaddya got?

The tips on the OB/BC's have that perfect little slot, but the tails are rounded and smooth and no matter what I do my tail hook/loop wants to slip off.

What's your solution?

I have the same issue with my V6s. I switched to a Pomoca twin tip tail hook. It's an improvement over the regular hook but can still pop off on occasion.

Thx. Next time you have that setup paired, would you mind snapping a pic? I just looked up those tail hooks, but can't quite envision how I'd mate them with my current skins.

[phoenix]

I have some G3 skins for my Objectives, the tail hook resembles that Pomoca tail hook jalp uses (just looked at those online), but the G3's is steel, with a little different strap. I just looked at the G3 site, but don't see it there currently. It's similar to the sort of two prong system I see they do still have on some of their tips. Anyway it works fine as long as you get the strap tension right (which is quite easy).

[jalp]

@mikesee They are probably only compatible with the Pomoca tail straps unfortunately.

I also put a little shoe goo in the hooks for a bit more friction. That alone may well make a difference with your current hooks.