mounting super telemark bindings onto world piste skis
- WorldMogul
- Posts: 15
- Joined: Thu Jan 21, 2021 11:35 pm
- Location: Winter Park
mounting super telemark bindings onto world piste skis
I am looking to mount Rottefella Super Telemark bindings onto K2 world piste ski (pre-drilled with 4 hole inserts). I would like to use the inserts that are already there.
Does the Rottefella Super Telemark riser plate (link below), have a 4 hole pattern on the bottom to attach to the world piste skis?
https://www.telemark-pyrenees.com/rotte ... iser-plate
The rottefella cobra(link below) has a 4 hole pattern metal plate that fits the world piste skis? Would that same metal plate work with the super telemark riser?
https://rottefella.no/media/pdf-manuals ... bra-R8.pdf
Other advise on getting the Super Telemarks onto the world piste skis appreciated!
Thanks!
Does the Rottefella Super Telemark riser plate (link below), have a 4 hole pattern on the bottom to attach to the world piste skis?
https://www.telemark-pyrenees.com/rotte ... iser-plate
The rottefella cobra(link below) has a 4 hole pattern metal plate that fits the world piste skis? Would that same metal plate work with the super telemark riser?
https://rottefella.no/media/pdf-manuals ... bra-R8.pdf
Other advise on getting the Super Telemarks onto the world piste skis appreciated!
Thanks!
- riel
- Posts: 308
- Joined: Tue Dec 15, 2020 9:31 pm
- Location: New Hampshire
- Ski style: BC XC
- Favorite Skis: Asnes Gamme, Ingstad & Støretind, Fischer Mountain Cross & E99
- Favorite boots: Fischer BCX675
- Website: https://surriel.com/
- Contact:
Re: mounting super telemark bindings onto world piste skis
The Voile riser plates attach to the ski with 4 screws, and then 3 screws are used to attach the bindings to the riser plates. That may be your best option. Those riser plates are available in several heights.WorldMogul wrote: ↑Thu Jun 24, 2021 1:13 pmI am looking to mount Rottefella Super Telemark bindings onto K2 world piste ski (pre-drilled with 4 hole inserts). I would like to use the inserts that are already there.
Does the Rottefella Super Telemark riser plate (link below), have a 4 hole pattern on the bottom to attach to the world piste skis?
https://www.telemark-pyrenees.com/rotte ... iser-plate
The Rottefella riser plates have 3 screws that go all the way from the binding, through the riser, into the ski. That doesn't sound like what you want.
- Nick BC
- Posts: 270
- Joined: Sat Mar 19, 2016 10:04 pm
- Location: Vancouver, BC
- Ski style: Free heel Resort/Backcountry
- Favorite Skis: Voile Vector BC,Trab Altavia and Hagan Ride 75
- Favorite boots: Scarpa TX and T3
- Occupation: Retired Community Planner
Re: mounting super telemark bindings onto world piste skis
Just a small point, if you use the Voile Traverse risers with a Super Telemark binding you will have to file/sand a small amount of plastic from the raised rear portion. The ST is a smidgen longer than the Voile HD Mountaineer. Not a big deal and I found this out when I mounted a Super Telemark cable binding on the Traverse shim.
- WorldMogul
- Posts: 15
- Joined: Thu Jan 21, 2021 11:35 pm
- Location: Winter Park
Re: mounting super telemark bindings onto world piste skis
Ok thanks for the good info!! I ended up using the cobra mount plates which have the 4 hole pattern on bottom...the ST doesn't fit perfect onto it, but a bit of duct tape made it workable!
- fgd135
- Posts: 470
- Joined: Sun Jan 19, 2020 2:55 pm
- Location: Colorado
- Ski style: Yes, sometimes.
- Favorite Skis: Most of them
- Favorite boots: Boots that fit
- Occupation: Yes
Re: mounting super telemark bindings onto world piste skis
Red? Red Green?! Didn't know you were a tele skier!
"To me, gracefulness on skis should be the end-all of the sport" --Stein Eriksen