Desperately Wanted - 7TM Power Parts!

[Flanny]

Hey folks,

I've been very happily using 7TM Power's for years, but now the metal toe pieces on mine are literally tearing themselves apart. There is a stress crack on both toe pieces running from the rear positioning pin receiver points up to the power-pin that makes them release too easily.

I've searched around like mad for parts from on-line retailers, but no dice for the toe-pieces themselves - they appear to only be available by purchasing the whole binding.

Does anyone have a set of 7TM power's to sell? Ideally, I really only need the two metal boot/toe receivers, but I can understand if someone would only sell the whole binding.

Send me an e-mail: Bryan at Flanny dot ca.

Thanks!

Bryan

[Johnny]

Hey Bryan,

I have a lot of 7TM parts... I'll check if I have 2 toe pieces... Do you have a picture of the broken piece?

(And welcome to TTT!)

[Flanny]

Cool - sure thing, will post some pics when I am back home tomorrow.

[Flanny]

So here is a picture of the parts I need. I only need the two (Left and Right) metal toe pieces, not the black straps, or power pins themselves, and not the heel assembly. Just the toe pieces.

Of course if it's easier to not disassemble them, I can take the whole assemblies no problem. Let me know if you have these!

[Johnny]

I found 2 cups... But they're from All Mountains, not sure if you would be able to fit the power pin?

Just out of curiousity, do you have a close-up picture of the actual cracks? I never seen that before on 7TM bindings...

[Flanny]

Thanks - I'll try to hold off to find a pair of 7TM Powers.

Here are the cracks that have developed in mine...They don't look like much (except for the last one), but the extra flex in the toe piece resulting from the crack makes them release too easily...

[Flanny]

Found a pair from a fellow member!

Thanks Tele-talk!

[montuckykid]

I had this happen to 3 sets of toe pieces. It looks like they reworked the toe pieces on the newer versions of 7TM powers. I was able to buy some parts from this guy last year - he was the north american 7 tm dealer and very helpful: http://www.powder-tribe.com/