WTB: Bishop BMF NTN Toe Cage
Posted: Wed Jan 25, 2023 2:09 pm
I know it's a long shot, but had one of my toe cages crack on my BMF-3 bindings. Just wanted to see if anyone had a spare one laying around. Thanks!
That is totally weldable. Is it stainless? Make sure your welder properly IDs the metal.shenvatele wrote: ↑Wed Jan 25, 2023 2:09 pmI know it's a long shot, but had one of my toe cages crack on my BMF-3 bindings. Just wanted to see if anyone had a spare one laying around. Thanks!
IMG_9842.JPG
First they'll want to unstress it so the fracture is closed and tight on its own (versus clamping it), tack weld on one or both ends (or middle), grind the || crack so it is \ /, then fill the \ / with metal so it's \|/. Then go back and grind out those surface tacks and V them, and weld there. There should be little to file on the underside. If you're decent with tools, you can grind and polish the weld flush afterward.