2025 Tx Pro
Posted: Sat Oct 19, 2024 4:51 pm
I just received a pair of these in a 26.5. Each boot is 260 grams lighter than my pre-2024 boot in the same size. They seem to fit the same, but I have yet to thermofit them.
The tech fitting and duck butt positions are such that they will put the boot center mark in the same exact spot, with the reduction in sole length being from the duck butt back (that was tested on the Meidjo and on the Outlaw X). NO WORRIES on relative location on old mount. If you mounted boot center on recommended on the old Tx Pro, it's still there.
Forward lean can still be adjusted.
The thing I disliked - intensely! - about the old boot was the #2 buckle from the bottom. Big improvement here. The idiot who engineered that was brought out of retirement to mess up the power strap! That is a new thing for me to hate. Overly involved compared to the old strap and harder to get the leverage to get the strap as tight. I'll probably be trading the old strap onto the new boot.
Measuring inside the boot, the height on both to the top of the back is 27cm and to the top of the side is 23cm. Interior length is shorter (one and a half fingers vs 2 for boot sizing in the same 26.5 size.
Surprisingly, the inserts are the same length as the previous version.
Also, I just thermofitted them down at REI. I forgot to have them put the "toe cap" in for this. In the past, when I thermofitted Intuition liners, this was required, as the material expanded around my toes. With these, that toe cap is not required. I guess the expandable material no longer extends into the toe area, which is a nice change!
The tech fitting and duck butt positions are such that they will put the boot center mark in the same exact spot, with the reduction in sole length being from the duck butt back (that was tested on the Meidjo and on the Outlaw X). NO WORRIES on relative location on old mount. If you mounted boot center on recommended on the old Tx Pro, it's still there.
Forward lean can still be adjusted.
The thing I disliked - intensely! - about the old boot was the #2 buckle from the bottom. Big improvement here. The idiot who engineered that was brought out of retirement to mess up the power strap! That is a new thing for me to hate. Overly involved compared to the old strap and harder to get the leverage to get the strap as tight. I'll probably be trading the old strap onto the new boot.
Measuring inside the boot, the height on both to the top of the back is 27cm and to the top of the side is 23cm. Interior length is shorter (one and a half fingers vs 2 for boot sizing in the same 26.5 size.
Surprisingly, the inserts are the same length as the previous version.
Also, I just thermofitted them down at REI. I forgot to have them put the "toe cap" in for this. In the past, when I thermofitted Intuition liners, this was required, as the material expanded around my toes. With these, that toe cap is not required. I guess the expandable material no longer extends into the toe area, which is a nice change!